Akcija!

DUNLOP EP103EU ECHOPLEX Delay kitarski efekt pedal

183,51 

Šifra artikla: EP103 – EAN: 710137096622 – Skupina: Kitare > Efekti za kitaro in bas > Echo / Delay / Reverb – Znamka: DUNLOP EFFECTS

1 na zalogi

Opis

DUNLOP EP103EU Echoplex®, Echoplex EP-3 legendarni "tape delay" tokrat v kompaktni izvedbi kot kitarski pedal. EP-3 je zaznamoval zvok v glasbi na sploh in uporabljali so ga v vseh zvrsteh glasbe; country, rock, blues, hard rock in metal. Njegov naraven in topel zvok je polepšal marsikateri zvok kitare, s svojim svojevrstnim delovanjem. EP103EU pa ponuja delay efekt v območju 40–750ms!

Tip efekta: Delay / Echo
Nominalni vhodni nivo: +5 dBV
Vhodna upornost: 1 MΩ
Nominalni izhodni nivo: +5 dBV
Izhodna upornost: 100 Ω
Vtičnice: 6.3 mm stereo jack input/ output – can be used as mono with normal instrument cables, 6.3 mm tap-tem
Napajanje: 9V DC
Zaslon: Status LED
Poraba toka: 240 mA
Kontrole: sustain, volume, and delay
Specifikacije: Delay time: 40 – 750 ms
Specifikacije II: Age control varies delay tone from pristine to dark and dirty
Specifikacije III: True bypass and optional trails bypass
Lastnosti: 100% Analogue dry path
Več lastnosti: Vintage Echoplex EP-3 tape echo warmth and modulation

Dodatni opis:

  • Vintage Echoplex EP-3 tape echo warmth and modulation
  • Age control varies delay tone from pristine to dark and dirty
  • 40–750ms of delay time

The Echoplex® EP-3 tape echo unit is famous for its deliciously warm, organic modulation and sweet musical voice—a key component to some of the most iconic guitar tones from the ’70s onward. The original EP-3 units, however, are expensive, temperamental, and larger than a VCR.

That’s where the EP103 Echoplex Delay comes in. It’s the size of a Phase 90, and it delivers the EP-3’s legendary tones with a simple control interface and a hi-fi all-analog dry path. The Delay control sets the time between repeats—from 40 to 750ms—the Sustain control sets the number of repeats, and the Volume control sets the output level of your repeats.

Where the sound of this pedal really shines, though, is in Age mode. By default, your pedal performs as a perfectly-calibrated, factory-fresh tape echo machine would— bright and clear tape with subtle wow and flutter modulation. A quick push of the Volume knob lets you “age” the sound of your repeats, darkening the tone, upping the tape saturation (distortion), and increasing modulation and tape distress as you turn the knob clockwise.

The EP103’s delay signal gets the same tonal conditioning that the EP101 Echoplex Preamp provides, while the dry path is left untouched. For the full EP-3 experience, put that secret sauce on your dry signal by running the EP101 in front of the EP103.

The Echoplex Delay also features tap tempo functionality, for up to 4 seconds of delay time, when you hook up an M199 MXR Tap Tempo Switch. The dry path is all analog with Constant Headroom Technology™—providing a full 20 volts of headroom—and a choice of true relay or trails bypass. The EP103 can be set for 100% wet mode along with stereo input and output modes. No tape cartridges required!

Effect Type: Delay / Echo
Nominal Input Level: +5 dBV
Input Impedance: 1 MΩ
Nominal Output Level: +5 dBV
Output Impedance: 100 Ω
Connectors: 6.3 mm stereo jack input/ output – can be used as mono with normal instrument cables, 6.3 mm tap-tem
Power Supply: 9V DC
Display: Status LED
Current Draw: 240 mA
Controls: sustain, volume, and delay
Specifications: Delay time: 40 – 750 ms
Specifications II: Age control varies delay tone from pristine to dark and dirty
Specifications III: True bypass and optional trails bypass
Features: 100% Analogue dry path
Features II: Vintage Echoplex EP-3 tape echo warmth and modulation