Opis
EQ-200 je najbolj prilagodljiv kompaktni EQ, ki je bil kdaj ustvarjen za kitaro in bas. Ima dva široka 10-pasovna EQ kanala in vgrajen grafični zaslon, ki na prvi pogled prikazuje trenutno krivuljo EQ. Izbirne strukture pretoka signala konfigurirajo kanale za stereo povezavo, vzporedno ali serijsko delovanje, možno pa je celo priklopiti zunanje pedale za bolj natančno pre/post oblikovanje tona. Če gremo še dlje; lahko frekvenčna središča vseh 10 pasov nastavite na tri različne vrste, kar vam omogoča optimizacijo delovanja EQ-200 za različne instrumente.
Tip efekta: EQ
Nominalni vhodni nivo: A/MONO, B: -10 dBu
Vhodna upornost: A/MONO, B: 2 M ohm
Nominalni izhodni nivo: A/MONO, B: -10 dBu
Izhodna upornost: A/MONO, B: 1 k ohms
Vtičnice: INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type CTL 1, 2/EXP jack: 1/4-inch T
Frekvenca vzorčenja: 96 kHz
A/D/A: 32 bits
Procesiranje signala: 32-bit floating point
Zaslon: Graphic LCD (64 x 32 dots, backlit LCD)
Poraba toka: 170 mA
Kontrole: ON/OFF switch, MEMORY switch 30–12.8 k sliders, LEVEL slider A/B button, MEMORY button
Specifikacije: Access 128 user setups from the panel or MIDI program change
Specifikacije II: Dual 10-band EQs that can be used in stereo, parallel, or series
Specifikacije III: Insert function for processing external effects with pre and/or post tone shaping
Lastnosti: 15 dB boost/cut on each band, plus overall level control for each channel
Več lastnosti: Stereo link function for operating both EQ channels together
Posebnosti: Intuitive interface with hands-on sliders and graphic EQ display
Pribor: Leaflet "USING THE UNIT SAFELY" Leaflet "To obtain the Owner’s Manual" Alkaline battery (AA, LR6) x 3 Rubber foot x 4
Širina: 101 mm
Višina: 60 mm
Globina: 138 mm
Teža: 630 g
Dodatni opis:
The EQ-200 is the most flexible compact EQ ever created for guitar and bass. It features two wide-ranging 10-band EQ channels, plus an onboard graphic display that shows the current EQ curve at a glance. Selectable signal flow structures configure the channels for stereo, parallel, or series operation, and it’s even possible to patch in external pedals for deep pre/post tone shaping. Going further, the frequency centers of all 10 bands can be set to three different types, letting you optimize the EQ-200’s performance for different instruments.
Effect Type: EQ
Nominal Input Level: A/MONO, B: -10 dBu
Input Impedance: A/MONO, B: 2 M ohm
Nominal Output Level: A/MONO, B: -10 dBu
Output Impedance: A/MONO, B: 1 k ohms
Connectors: INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type CTL 1, 2/EXP jack: 1/4-inch T
Sampling Rate: 96 kHz
A/D/A: 32 bits
Signal Processing: 32-bit floating point
Display: Graphic LCD (64 x 32 dots, backlit LCD)
Current Draw: 170 mA
Controls: ON/OFF switch, MEMORY switch 30–12.8 k sliders, LEVEL slider A/B button, MEMORY button
Specifications: Access 128 user setups from the panel or MIDI program change
Specifications II: Dual 10-band EQs that can be used in stereo, parallel, or series
Specifications III: Insert function for processing external effects with pre and/or post tone shaping
Features: 15 dB boost/cut on each band, plus overall level control for each channel
Features II: Stereo link function for operating both EQ channels together
Features III: Intuitive interface with hands-on sliders and graphic EQ display
Accessories: Leaflet "USING THE UNIT SAFELY" Leaflet "To obtain the Owner’s Manual" Alkaline battery (AA, LR6) x 3 Rubber foot x 4
Width: 101 mm
Height: 60 mm
Depth: 138 mm
Weight: 630 g
