Description
Danes predavanja in predstavitve večinoma potekajo s podporo avdio in vizualnih medijev. Priključitev prenosnih računalnikov na PA mešalne mize je lahko velika težava zaradi nezdružljivih formatov priključkov. Pretvornik signala Palmer PLI06 je namenski vmesnik za pretvorbo nebalansiranega stereo signala, ki ga običajno zagotavlja prenosnik, na balansiran signal (mono) ki ga peljemo v mikrofonski vhod profesionalnih mešalnih miz. Signal se iz mono nebalansiranega v stereo balansiran signal pretvori z visokokakovostnim avdio transformatorjem. Preprečuje brnenje, ki je posledica slabe ozemljitve. Ne potrebuje napajanja ali baterij.
Tip efekta: Line Selector
Nominalni vhodni nivo: +6 dBu
Vhodna upornost: 6k Ohm(s)
Nominalni izhodni nivo: +6 dBu
Izhodna upornost: 600 Ohm(s)
Vtičnice: 2 x rca in, 1 x xlr out
Frekvenčni razpon: 20 – 20.000 Hz
Širina: 130 mm
Višina: 35 mm
Globina: 60 mm
Teža: 0,25 kg
Artikel: PLI06
Dodatni opis:
Today, lectures and presentations are mostly held with audio and visual media support. Connecting laptop computers to the mixing consoles of PA systems, however, can be a major problem due to incompatible connector formats. The Palmer Line Level Convertor PLI06 is a dedicated interface to feed the unbalanced stereo signal typically provided by a laptop to the balanced (mono) microphone inputs of professional mixing desks. It mixes the stereo output to mono while impedance matching and signal balancing are achieved by a high quality audio transformer especially designed for the unit. Moreover, it also prevents ground loops and the annoying hum they result in. The PLI06 is entirely passive and does not require mains power or batteries.
Connecting the PLI06
Equipment providing audio output on RCA phono sockets is connected to the PLI06's inputs using a shielded RCA stereo cable. For best results with laptops we recommend using their headphones output which is usually on a 3.5 mm miniature stereo socket. Use a shielded TRS mini jack to 2x RCA phono cable for connection to the PLI06. Place the unit close to the signal source and keep the input cable as short as possible since the unbalanced signal path is susceptible to interference. The PLI06's output is on a standard wiring male XLR connector. Use a high quality microphone cable for connection to the mixing console. Due to the balanced lo-Z signal provided by the Palmer Line Level Converter cable lengths are uncritical while interference- free signal integrity is maintained.
Effect Type: Line Selector
Nominal Input Level: +6 dBu
Input Impedance: 6k Ohm(s)
Nominal Output Level: +6 dBu
Output Impedance: 600 Ohm(s)
Connectors: 2 x rca in, 1 x xlr out
Frequency Response: 20 – 20.000 Hz
Width: 130 mm
Height: 35 mm
Depth: 60 mm
Weight: 0,25 kg
Product: PLI06
