Opis
Originalna navodila v slovenščini vsebujejo samo IK Multimedia izdelki kupljeni v Sloveniji.
iRIG STOMP I/O je povsem nov tip USB pedalboard kontrolerja, ki deluje na principu MFi audio vmesnika z MIDI vhod/izhod za iPhone, iPad, Mac in PC naprave. Robustna konstrukcija iRIG STOMP I/O s kovinskimi stikali in expression pedalom ter LED kontrolne lučke. Možnost pa je še dodatna priključitev dvek dodatnih pedal ali stikal. iRIG STOMP I/O deluje kot visoko kvalitetni 96kHz/24-bit avdio vmesnik. iRIG STOMP I/O deluje tudi kot samostojen MIDI vmesnik brez vseh naprav in tako ga lahko uporabljate z synth modoli in klavijaturami in ostalo MIDI pevezljivo opremo. iRIG STOMP I/O ponuja možnost uporabe z aplikacijami kjot so AmpliTube, AmpliTube Acoustic , VocaLive, na Mac/PC kot tudi na iPhone in iPad!
Tip efekta: Nožni multiefekt
Nominalni vhodni nivo: from 30mVpp to 6.9Vpp
Vhodna upornost: 1MOhms
Vtičnice: balanced female 3-pin XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Frekvenca vzorčenja: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
A/D/A: 24-bit A/D, 24-bit D/A
Frekvenčni razpon: 20 Hz – 20kHz +/-1.5dB
Specifikacije: Power: USB bus powered (when used with a computer) or DC IN
Specifikacije II: Four metal foot-switches with one indication LED each, dual color
Specifikacije III: Two analog potentiometers for Input GAIN and output VOLUME
Lastnosti: Continuous pedal (expression pedal) with virtual switch at the top of its travel
Več lastnosti: B-Type USB socket for connecting a computer (Mac/PC)
Posebnosti: Mini-DIN "iOS" connector for connecting an iOS device
Pribor: USB A-Type to USB B-Type connection cable (2.5m/8.2ft), DC power supply
Širina: 41.5cm
Višina: 7.2cm
Globina: 21cm
Teža: 3.2kg
Dodatni opis:
The ultimate floor tone rig
iRig Stomp I/O is a brand new type of USB pedalboard controller that integrates a professional, high-resolution, MFi certified audio interface with MIDI input/output for iPhone, iPad, Mac and PC.
It comes bundled with state-of-the-art guitar, vocal processing, and recording software for flexibility and usability, both live and in the studio.
Sturdy and robust, yet easily transportable, iRig Stomp I/O features four onboard metal stomp switches plus an expression pedal with a switch, all with LED indicators.
To further extend its control possibilities, you can connect up to 2 additional switches or pedals. The MIDI IN/OUT ports make it possible to seamlessly control external processors when iRig Stomp I/O is used as a stand-alone MIDI foot controller, without any device or computer connected to it.
Effect Type: Floor Multi-Effect
Nominal Input Level: from 30mVpp to 6.9Vpp
Input Impedance: 1MOhms
Connectors: balanced female 3-pin XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
A/D/A: 24-bit A/D, 24-bit D/A
Frequency Response: 20 Hz – 20kHz +/-1.5dB
Specifications: Power: USB bus powered (when used with a computer) or DC IN
Specifications II: Four metal foot-switches with one indication LED each, dual color
Specifications III: Two analog potentiometers for Input GAIN and output VOLUME
Features: Continuous pedal (expression pedal) with virtual switch at the top of its travel
Features II: B-Type USB socket for connecting a computer (Mac/PC)
Features III: Mini-DIN "iOS" connector for connecting an iOS device
Accessories: USB A-Type to USB B-Type connection cable (2.5m/8.2ft), DC power supply
Width: 41.5cm
Height: 7.2cm
Depth: 21cm
Weight: 3.2kg
